Wir empfehlen auch: | ||
---|---|---|
ASI2600MCP 2589.89 EUR |
||
ASI294MCP 1398.89 EUR |
||
A508T2 28.89 EUR |
||
M48T2 22.99 EUR |
ASI533MC-Pro Camera with Sony IMX533 9MP CMOS image sensor in a square format with a 3.76 um pixel size, capable of producing frames at 20 frames/sec in 14bit mode.
Sony’s back-illuminated CMOS image sensor improves sensitivity and noise reduction – the key factors to enhancing image quality, while radically realigning their fundamental pixel structure from front-illumination to back-illumination. It has retained the advantages of CMOS image sensors such as low power consumption and high-speed operation.
With
a conventional front-illumination structure, the metal wiring and
transistors on the surface of the silicon substrate that form the
sensor’s light-sensitive area (photo-diode) impede photon gathering
carried out by the on-chip lens. A back-illuminated structure minimizes
the degradation of sensitivity to optical angle response, while also
increasing the amount of light that enters each pixel due to the lack of
obstacles such as metal wiring and transistors that have been moved to
the reverse of the silicon substrate.
Sony has newly developed a
unique photo-diode structure and on-chip lens optimized for
back-illuminated structures, that achieves a higher sensitivity and a
lower random noise without light by reducing noise, dark current and
defect pixels compared to the conventional front-illuminated structure.
Low read-out noise, high dynamic range. Read out noise is as low as 1.0e which makes it
comparable to SCMOS or EMCCD sensors and highly suitable for high
definition, low noise imaging.
Traditional CMOS sensors produce a weak infrared light source during operation quite often seen in the corner of uncalibrated images as the tell tale signs of ‘amp glow’. As the ASI533MC PRO uses zero amp glow circuitry, you won’t have to worry about amp glow even when using high gain, long exposure imaging.
DDR Memory Buffer
The ASI533MC PRO is equipped with a USB 3.0 interface, and even in 14bit mode, can reach 20 frames per second. The 256MB DDR3 memory ensures stable downloading of frames with increased USB speeds.
Note: We recommend using an external 12V power supply to power the camera instead of USB 3.0/2.0 only
Note2: We recommend using a 1,25" IRUVcut filter. It fits into the 1,25"-T2 connector, placed inside the 11mm T2 ring that comes with the camera
#christmas-sale #Planetary2023
#ZWOWinter
#ZWO2024
ASI2600MCP | ASI2600MC-Pro APS-C Farbkamera | 2589.89 EUR | ||
ASI294MCP | ZWO ASI294MC-Pro Farbkamera (Diagonale: 23,2mm, Auflösung: 11,7MP, USB3.0, IMX294 Sony Back-illuminated CMOS, gekühlt) | 1398.89 EUR | ||
A508T2 | Adapter 2 Zoll auf T2-Gewinde, mit 2" Filtergewinde in der Steckhülse | 28.89 EUR | ||
M48T2 | T2 FOKALADAPTER (von M48 innen auf T2 außen) | 22.99 EUR | ||
M48M486 | VERLÄNGERUNG M48-M48 (6mm) | 17.89 EUR | ||
M48M488 | VERLÄNGERUNG M48-M48 (8mm) | 17.89 EUR | ||
M48M4810 | VERLÄNGERUNG M48-M48 (10mm) | 21.89 EUR | ||
OpLproCCD1 | L-PRO CCD Filter 1,25" (IDAS-ähnlich) | 128.88 EUR | ||
OpLproCCD2 | L-PRO CCD Filter 2" (IDAS-ähnlich) | 197.89 EUR | ||
OpLeNhance | L-eNhance Schmalbandfilter 2" für Farbkameras | 228.89 EUR | ||
AsIRUV | UV/IR-Block CCD L2 Filter 1,25" | 69.00 EUR | ||
Stab5 | 12V Netzteil, geregelt bis 5000mA | 39.90 EUR |